VORTEX & YUKON THE FORCE OF OPTICS

The Ranger Pro 5x42 is a vivid example of successful application of digital technologies in observation optics. Currently this is the ultimate night vision digital device. The Ranger Pro features impressive 5-power magnification and large viewing range – up to 600 metres. This is due to a highly sensitive CCD array and new Sum Light tm software technology employed in the Ranger Pro device.

The Ranger Pro 5x42 can surely compete with the Gen.2 in image sharpness and brightness. The image transmitted to the monochrome LCD display is crisp and sharp on the entire field of view. The device is able to capture effectively the light flux of a wide wave range in conditions of natural night illumination. To conduct observation on a cloudy moonless night, the adjustable IR illuminator can be used. The wave length amounts to 940nm (remote area of the IR range, invisible to the human eye) – the observer is “invisible” even if the unit is used in the active mode. The Ranger rivals the effectiveness of comparable Gen 2 and Gen 3 night vision devices at any range.

Viewing Range
5 - 600 meters

Battery Life
3 hours with IR Illuminator / 10 without IR Illuminator

Video output
The built-in video output enables image transmission and video recording on peripheral equipment (monitor etc.) while carrying out stationary or mobile observations.

Sum Light Technology
SumLight system of light accumulation allows use of the Ranger Pro even at critically low levels of night illumination.

Brightness Adjustment Wheel
Image produced by the Ranger Pro is shown on the Liquid Crystal Display (LCD). Manual adjustment of LCD brightness is operated with the adjustment wheel.

Power Supply
The Ranger Pro can operate on external power sources such as vehicle's or stationary power grid (the device is equipped with a special output for that) or independently on AA batteries/rechargeable batteries.

FEATURES
- Day and night operation
- Higher resolution than Gen1
- Extra long distance viewing, effective up to 600 meters
- Contrast adjustment control
- Stealth™ operation with invisible, powerful dual IR illuminators
- Enhanced multi-coated optics
- Direct video output capability
- Built-in ¼” tripod socket
- Rugged Rubber Armor™ construction
- Compact
- Car power adapter included

The NVMT Laser 3x42 Rifle Scope Kit provides the user with everything needed to mount the included NVMT on a rifle. Versatility is this affordable scope's middle name. NVMT Laser 3x42 Riflescope Kit combines NVMT 3x42 and night vison riflescope at the same time. The red dot of the laser is used as an adjustable aiming mark.

NVMT Rifle Conversion Eyepiece and NVMT Rifle Mount as well as NVMT Rifle Conversion Kit (includes a mount, an riflescope eyepiece and a laser pointer) can be combined with NVMT 3х42 and sold separately.

The monocular included in the Riflescope Kit is compact, lightweight device providing comfortable viewing and versatility for numerous activities. It's magnification is high enough to use for long-distance observation, but it is compact enough to fit in a pocket. It's perfect for the outdoor enthusiast to take from a sporting event to a hunt.

The Yukon's exclusive PULSE™ system Infrared (IR) Illuminator provides infrared lighting for an enhanced image, while staying invisible to the human eye and animal's eyes. The PULSE™ system utilizes quick IR energy bursts that penetrate further to increase distance, visibility and image quality, without significant battery drainage or untimely IR burnout.

The NV 5x60 Night Vision Monocular is remarkable for its high light- gathering capacity and stunning high power magnification that far surpasses the capabilities of standard night vision devices. Due to a the large optical diameter of the objective lens (60mm) and enhanced contrast transfer function, the images produced by the NV 5x60 are is bright and crisp with a resolution of around 40 lines/mm.

The figure of the visual magnification – 5 power – is one of the most impressive among gen.1 night vision devices. The housing of the unit is made of highly durable plastic. Efficient internal arrangement of parts and components contribute to an optimal weight-dimensions ratio.

The NV 5x60 is equipped with a built-in IR illuminator for observing images in complete darkness and also when there are insufficient levels of natural illumination at night (to increase quality and range of observation). The NV 5x60 is also tripod adaptable, convenient for long-time observation.

The NVMT 2 (3x42) is the best selling NVMT and is possibly the most versatile in the NVMT line. It's magnification is high enough to use for long-distance observation, but it is compact enough to fit in a pocket. This affordable, compact, lightweight monocular provides comfortable viewing and versatility for numerous activities.

It's perfect for the outdoor enthusiast to take from a sporting event to a hunt. The Yukon's exclusive PULSE™ system Infrared (IR) Illuminator provides infrared lighting for an enhanced image, while staying invisible to the human eye and animal's eyes. The PULSE™ system utilizes quick IR energy bursts that penetrate further to increase distance, visibility and image quality, without significant battery drainage or untimely IR burnout.

The NVMT 2 (3x42) has a high enough magnification to use for long-distance observation, but also provides a lightweight, durable body that makes it easy

Body Description
The ergonomically designed, durable, RUBBER ARMOR™ body fits comfortably in the palm of your hand and can fit in your pocket for those quick escapes. It's perfect for travel and prolonged use.

Optics / Performance
The NVMT's newly developed lenses maximize light amplification through improved frequency/contrast to carry without hassle.

Turn your NVMT into a hands-free monocular with Yukon's NVMT 1x24 Head Mount Kit. The NVMT 1x24 Head Mount Kit fashioned after military-tested designs, provides hours of comfortable hands-free operation, perfect for high-tech Ranger games & night hiking.

This kit comes with a NVMT 4 (1x24) monocular and a head mount to turn your NVMT into a hands-free monocular. The low magnification of NVMT 4 (1x24) prevents distance distortion and comfortable viewing, while working.

This affordable, compact, lightweight monocular provides comfortable viewing and versatility for numerous activities. It's perfect for the outdoor enthusiast to take from a sporting event to a hunt. The Yukon's exclusive PULSE™ system Infrared (IR) Illuminator provides infrared lighting for an enhanced image, while staying invisible to the human eye and animal's eyes.

The PULSE™ system utilizes quick IR energy bursts that penetrate further to increase distance, visibility and image quality, without significant battery drainage or untimely IR burnout.

Body Description
The ergonomically designed, durable, RUBBER ARMOR™ body protects the whole unit from dust, dirt, moisture. It's perfect for hiking and prolonged use.

Optics / Performance
The NVMT's newly developed lenses maximize light amplification through improved frequency/contrast characteristics.

Three power magnification and a 50 mm high-aperture objective lens allow using the NVMT 3x50 for long-distance observation, more than a half of a kilometer. The objective lens has improved frequency and contrast features which delivers a crisp and contrast image with good resolution.

The NVMT 3x50 (gen. 2+) is a passive device, it does not require any artificial light source, although a built-in or extra artificial infrared light will greatly enhance the scope's effectiveness especially at low level of night illumination (no Moon, starry sky or starry sky with partial cloudiness). The NVMT 3x50 employs an EMP66G2 image intensifier tube (gen. 2+) (total responsivity of the photocathode 400 – 550 μA/lm).

The NVMT 3x50 (gen. 2+) features fine ergonomics, it is well-balanced, can be easily transported and is perfect for use in harsh field conditions. The NVMT 3x50 (gen. 2+) is entirely self-contained and can operate for up to 40 hours on a CR123A battery. The soft-touch coating of the body allows you to hold it even in the wet hands.

The NVMT 3x50 (gen. 2+) is ideal for hunting in night conditions, professional observation (guarding of industrial objects, nature preservation activities), amateur night photography, hiking etc.

At the core of the Challenger GS 2.7x50 is the unique combination of specially designed optics and the CF-Super Image Intensifier Tube which ensure highest edge-to-edge resolution, clear, distortion-free and geometrically precise image across the entire field of view.
The body of the device is hermetically sealed which enables use in inclement weather (fog, heavy shower, dusty environment, sand storm etc.).
The Challenger GS 2.7x50 is equipped with a powerful infrared illuminator that can be used in insufficient illumination conditions for observation at over-average distances. The device also has a matching site to install auxiliary, more powerful, focusable IR Illuminators Pulsar. The device and the built-in IR illuminator are switched on/off with a single switch. Design of the switch prevents the IR illuminator from accidental activation (to avoid disclosure of the observer).
The Challenger GS 2.7x50 boasts a wide range of applications such as night orientation, tourism, hunting, guarding of industrial facilities and private property, military and sport games, patrolling and rescue operations.

SPECIFICATIONS
Image Tube Type - CF-Super / EP-33-SF
Magnification - x 2.7
Objective Lens Diameter - 50mm
Resolution (centre/edge FOV) - lines/mm 42 / 36
Angular field of view - degree 13
Max. Detection Range - 200m*
Eyepiece adjustment - diopter ±4
Exit pupil - 6mm
Eye relief - 12mm
Operating voltage - 3V (1xCR123A)
Tripod mount - ¼ inch
Min. operating time (IR off / on) - hour 50 / 20
Operating temperature - - 20 …+ 40 °C
Dimensions - 202x79x57mm
Weight of the unit - 0.5kg
Degree of protection (IEC 60529) - IP46
* - in normal nighttime conditions – 0.05 lux (quarter moon), m

The Edge GS 2.7x50 night vision binocular is primarily designed for a wide range of applications: protection of industrial facilities and private property, patrolling, search and rescue, military and sports games, tourism, night orienteering.
The Edge GS 2.7x50 is equipped with a high-powered IR Illuminator with adjustable power, which allows the device to be used for observation in low light conditions at above the average distances.
The IR power adjustment wheel and other control elements are located on top of the device. The binocular has a built-in Weaver rail to accommodate an additional IR- Illuminator.
The housing made of metal and plastic guarantees durability and operational resistance.
Due to the combination of the CF-Super image intensifier tube, specially designed optics and wide- angled eyepiece, the Edge GS 2.7x50 boasts a distortion-free image which is sharp, precise, and high quality.
The device has a built- in light exposure protection system - once the luminance threshold level is exceeded, current feed to the tube is automatically reduced or fully ceased.

SPECIFICATIONS
Image Tube Type (Generation) - CF-Super
Magnification - x 2.7
Objective lens - 50mm
Resolution - lines per 42mm
Angular field of view - degree 13
Max. Detection Range - 250m*
Eyepiece adjustment - diopter ±4
Exit pupil - 4mm
Operating voltage - 3V(2xAAA)
Min. operating time (IR off / on) - hour 50/20
Operating temperature - -20...+40 °C
Dimensions - 203x122x65mm
Weight of the unit - 0.85kg
* - in normal nighttime conditions – 0.05 lux (quarter moon)

The Edge GS 1x20 is primarily designed for use as night vision goggles (the device can also be mounted on a Head Mount included in the box). Lack of visual magnification (1x) provides the user adequate spatial orientation and comfortable operation when in motion (the user is able to estimate distance to the object or between objects correctly).
The Edge GS 1x20 NV Goggles is equipped with an energy-conserving IR Illuminator with adjustable power. IR power adjustment wheel and other control elements are located on top of the device.
At the core of the Edge GS 1x20 NV Goggles is a unique combination of specially designed optics, CF-Super Image Intensifier Tube, and wide-angled five-lens eyepiece which provides lack of distortion and the highest edge-to-edge resolution performance. The Edge GS 1x20 NV Goggles have enhanced service durability. The housing is sealed which allows it to be used in harsh conditions (in the rain or dusty environment).
The device has an image intensifier tube protection system – once the luminance threshold level is exceeded, current feed to the tube is automatically reduced or fully ceased.
The Edge GS 1x20 NV Goggles has a wide range of applications: protection of industrial facilities and private property, patrolling, search and rescue, military and sports games, tourism, nocturnal walks on foot or bicycle and night orienteering.

SPECIFICATIONS
Image Tube Type - CF-Super / EP-33-SF
Magnification - x 1
Objective lens - mm 20
Resolution (centre/edge FOV) - lines/mm, min. 42 / 36
Angular field of view - degree 40
Viewing Range - m * 100
Eyepiece adjustment - diopter ±4
Exit pupil - mm 4
Operating voltage - V 3 (2xAAA)
Min. operating time (IR off / on) - hour 50 / 20
Operating temperature - -20 °C ... +40 °C
Dimensions - mm 163x113x60
Weight of the unit - kg 0.65
Weight of the head mount - kg 0.2
* - in normal nighttime conditions – 0.05 lux (quarter moon), m

Digital riflescope Digisight N550 is a perfect combination of the latest developments in the field of optics and electronics.
Along with good optical characteristics (fast aperture focusable lens 50 mm ƒ1.0, 67 mm eye relief) the riflescope features a wide range of options which allow it to be tuned to one's personal needs.
The riflescope uses a highly sensitive CCD array (with a range of operation illumination 0.00003 - 30000 lux), image is transmitted to a VGA display, 640x480 pixels. The Digisight N550 also has Sum Light™ function which automatically increases CCD array sensitivity under low light conditions.

The screen displays information on operation status (running time, low battery indicator, camera operation mode). One of the remarkable features is the possibility of zeroing the riflescope not only in the traditional manner but also using a new “one shot zeroing” method. This makes the zeroing procedure significantly faster and more convenient.
The Digisight N550 has several switchable pre-loaded reticles of various shapes. Apart from this, the user can upload optional reticles. Reticle inversion (color change from white to black and vice versa depending on the target colour) and enhanced contrast function are very useful too.

The riflescope is equipped with a built-in IR Illuminator which should be used in low light conditions in the nighttime. The Weaver rail on the side of the body allows an auxiliary, more powerful IR Flashlight (please refer to section “Accessories”) to be attached. Basic control functions (switching on/off the riflescope and the IR Illuminator, reticle inversion) can be performed with the help of the included remote control.

The riflescope also features a jack performing two functions – Video Out (to conduct video recording to external devices without the use of additional adapters and camera or camcorders) and Video In (can be used to display on the riflescope’s screen information transmitted from remote cameras via radio channel).
The Digisight N550 is resistant to bright light exposure and features excellent operational characteristics. The riflescope can be mounted on a wide range of hunting weapons including those of large calibers (shock resistance is guaranteed if cartridges with muzzle velocity not exceeding 6000 Joules are used).
The riflescope operates on four rechargeable batteries but can also be powered with an external power supply. Digisight N550 is designed for hunting, sports shooting, night video recording, general observation.

Optical characteristics:
Generation - Digital
Magnification, - x 4.5
Objective lens - 50 mm, F/ 1,0
Field of view, degree / m (at 100m distance) - 5.5 / 9.6
Eye relief, mm - 67
Exit pupil, mm - 6
Resolution, lines/mm - 50
Max. detection distance, m * - 600
Eyepiece diopter adjustment, - ±4D
Close-up distance, - 5m

CCD array characteristics:
Type of CCD array - ICX659AL
Resolution, - pixel 752(H)х576(V)
Format (physical dimensions) - 1/3” (4.8x3.6 mm)
Output video signal standard - CCIR / PAL

Display characteristics:
Resolution, - pixel 640х480x3; 921600 pixel (VGA quality)
Active pixel zone, - 9.0 x 6.8mm
Display diagonal, - 0.44 inch

Operational characteristics:
Operating voltage - 3.9V ... 5.9V (4xAA type rechargeable batteries)
External power supply / consumption power - DC 9-15V / 3W
Degree of protection, - IP code (IEC 60529) IP44
Operating temperature, - -10 °C... +35°C
Operation time with one set of rechargeable batteries (built-in IR off/on), - 4 / 3.5 hour
Dimensions, - 340x95x94mm
Weight, - 1kg

The NVRS Tactical 2.5x50 (gen.1) is an affordable scope that provides comfortable viewing, high performance and accurate shooting. The NVRS line is the hunter's best friend with its ruggedness, durability and ease of use. These riflescopes are equipped with the powerful and safe infra-red flashlights providing recognition of objects in absolute darkness at distances up to 200 meters.

The riflescopes are completed with the remote console to switch on a riflescopes or its IR flashlight from an fore-end of rifle. The oblique ergonomic blinker protects an eye from extraneous flares, masks a green luminescence of the image intensifire tube. The construction of the riflescopes provides excellent damp-proofing of all item, including high-voltage part of the image intensifier tube, that guarantees uninterrupted and safe work of the device. The ON/OFF switches for power and the built-in Infrared Illuminator are designed to prevent hand cramps and accommodate users wearing gloves.

The battery powered night vision riflescope comes standard with an ON/OFF remote control for a hands-free use and a camera adapter for nighttime photography (for Weaver-mountable Riflescopes only). And don't worry about re-mounting the NVRS after each use with its standard on-rifle carrying case. The case fits around the NVRS while it is mounted on the rifle for easy storage. Each unit is fit with a flip-top objective lens cover that protects the high-quality image tube from intense light that could damage the tubes. This versatile and affordable unit can be used for numerous outdoor activities and is perfect for the outdoor enthusiast.

Body Description
NVRS Tactical 2.5x50 is equipped with two Weaver - rail on the body to attach diverse accessories: DSAS, Laser Aimer, IR-Flashlight. The NVRS Tactical 2.5x50 is remarkable with its mass-dimensional characteristics and high light gathering capabilities. Small weight is provided by especially strong and light titanium body.

Optics / Performance
NVRS lenses have high frequent - contrast characteristics. All optical units are made of a qualitative glass with plotting of multilayer clarifying coatings. On cleanness a field of vision the riflescopes meet the requirements of the most exacting buyers and are considered as one of best.

Electronics / Performance
Every NVRS has a noiseless power supply unit, designed specially for the Yukon Advanced Optics`night vision. The electric equipment units of the riflescopes are reliably isolated, therefore a negative effect of the magnetic field of the Earth on a position of the aiming reticle is completely eliminated.

Mount
This NVRS includes a Weaver Long

The Phantom Night Vision Riflescope takes into account all requirements for modern night hunting. The Phantom has a strict design and highly functional. It is waterproof (gas filled optical channel, impermeability class IPX6) and can be used in precipitation of any intensity.

The gas filled channel prevents optics and internal cavities of the riflescope from condensation that may be caused by temperature difference or higher humidity. Design of the body and a reinforced component tube ensure shockproof with the use of heavy recoil ammunition, including 9.3x62, 9.3x74, 375H&H.

The Gen II+ tube with automatic brightness adjustment and along with high aperture lens provides sharp and clear picture. High light gain constant allows hunting even in situation of critically low night illumination (down to 10-4 lx – “night sky in clouds”). A problem of choosing a reticle also has been solved effectively. With the Phantom hunter can choose the most suitable configuration of the reticle and change it by simply pressing of the button. Voltage stabilization system eliminates risk of the reticle shift even with almost discharged battery.

The hunter can choose one of the three reticles that suits the specific situation best and switch it by a simple push of a button. Blinking of the reticle means that the battery should be replaced within 15-30 minutes. 26157T features a Mil-Dot reticle.

A Weaver 7/8” rail on the left side of the body is used for affixing various accessories: additional and more powerful IR-illuminator, laser pointer, directional microphone etc. Main controls are on top of the upper board excluding unpredictable changes of setup parameters.

Remote Control
Duplicates the “on/off” function of the device and IR illuminator and quick start-up of the riflescope and IR illuminator (the device works only when the button is kept pressed). This is very convenient in order to find the appropriate position, take aim and shoot.

Objective lens
The objective lens has a quantified focusing mechanism with fixation on 100m range. This allows you to get a sharp image at any distances within the working range.

Power Supply
The riflescope can be powered with one AA (1.5V) or CR123 (3V) battery. The power supply unit with a voltage stabilization system ensures proper work of all systems of the riflescope even when the battery is nearly empty.

Objective Lens Cap
The cap is fastened on a rigid plastic ring dipped into the groove in the objective of the covering. This secures the cap from being lost. There is no need to remove the cap when viewing or shooting - you can simply slide it back and fix anywhere on the objective housing.

IR Illuminator
The riflescope is equipped with a powerful IR illuminator with focused light spot, from concentrated to diffused one.

Instant Start
The fast start-up of the riflescope and IR is very convenient when constant observation is not conducted in order to get familiarized with the situation. In this case the riflescope works only when the button is kept pressed.

Mount

This Phantom riflescope has a Weaver-Long, as well as with the unbrversal adapter allowing to install Phantom onto different types of rifles with the help of Kilik Feintechnik (MAK®) mounts.

Night vision riflescope Sentinel 3x560 features 3x magnification and high light gathering capacity. The Sentinel combines traditional Yukon style (perfect design, ergonomics, reliability and convenient use) with an enhanced level of functionality.

The Sentinel has a high grade of water resistance (IPX4 grade, according to the standard IEC 60529) and can be operated in precipitation of high intensity. The scope is built with a high performance Gen1 image intensifier tube. Extra tube protection provides durability towards axial load when used with the majority of popular calibers, including .300, .308 or similar.

It is reasonable to use the integrated IR Illuminator for observation or shooting in low levels of night luminance. Power supply, with the voltage stabilization, works up to 70 hours using 2 AA batteries. The batteries (2xAA) are placed in the battery compartment vertically thus eliminating the influence of recoil on the stability of the energy supply.

The Sentinel has two scales - a horizontal scale to measure distance to the target, and a vertical one which facilitates adjustment when shooting at different distances. It is advisable to change the color of the reticle depending on the surrounding conditions. Red is the best when used in clear viewing conditions, green is preferable for use when viewing is obscured.

The Sentinel 3x60 has a wide range of mounts for weapon, including Weaver 7/8” (3 modifications), AK Side Mount, «Los» Mount, and Prism 14/200 Mount. The SENTINEL is a universal night vision scope, which is ideal for night observation and hunting.

Power Supply
A stabilized power supply ensures up to 70 hours of full operation. This prevents reticle shift, change of its brightness even when the battery is nearly empty.

Weaver 7/8” rail
The riflescope has an extra 7/8” Weaver rail placed on the left side of the body and is designed for mounting accessories (IR illuminator, directional microphone and laser pointer).

Built-in IR illuminator
The built-in IR illuminator makes it possible to use the riflescope in utter darkness. The IR has the function of focusing the light flux, ranging from narrow directed to dispersed.

Objective Lens Cap
The cap is fastened on a rigid plastic ring dipped into the groove in the objective of the covering. This secures the cap from being lost. There is no need to remove the cap when viewing or shooting - you can simply slide it back and fix anywhere on the objective housing.

Internal focusing of the objective.
The image focusing mechanism (from 2 m. up to infinity) with fixation of the focus ring knob at the mark “100m”, provides clear image at any distances (including short) within the riflescope's working range.

Remote Control
Along with standard functions, the remote control has a quick start-up function. This is very convenient when constant observation is not conducted in order to find the appropriate position, take aim and shoot.

Low battery indicator
Double function LED indicator. Green light when the battery is full. As the battery runs down, the power indicator changes its color from green to red. This means that the riflescope will still be functioning for about half an hour before the battery is completely empty.

Mount Possibilities
The Sentinel can be supplied with one of the next types of mounts: Weaver mount, Weaver-Auto, Weaver-Long, AK Side Mount, "Los" mount (for Russian rifles), Prism 14/200 mount.

Night vision riflescope Sentinel G2+ 4x60 is intended for observation and shooting at dusk or during nighttime hours. Sentinel G2+ 4x60 features 4x magnification and high light gathering capacity. The Sentinel G2+ 4x60 uses an EPM66G-2 (Gen.2+) tube with the light magnification factor not less than 25 000 and total responsivity of the photocathode 400 – 550 μA/lm. The image intensifier tube and optics are enclosed in a titanium housing which provides high performance qualities of the riflescope. The Sentinel G2+ 4х60 possesses high impact resistance and can be mounted on a hunting gun of various calibers (up to .375) with the muzzle energy of the bullet up to 6000 Joules. The high-aperture 60 mm objective lens with internal focusing allows obtaining a sharp picture at different distances (starting from 8 meters).

The Sentinel G2+ 4х60 is a passive starlight device, and in most conditions does not require an artificial or IR light source. The incorporated IR Illuminator enhances riflescope's viewing ability in complete darkness or in moonless and starless environment. The riflescope and IR Illuminator are switched on by a knob recessed in the housing which prevents the unit from accidental switching or with help of the remote control.

The Sentinel G2+ has a brightness control option and a range-finding scale which facilitates adjustment when shooting at different distances provided the shooter knows the size of the target. It is advisable to change the color of the reticle depending on the surrounding conditions. Red is the best when used in clear viewing conditions, green is preferable for use viewing is obscured. 26126Т features a Mil-Dot reticle.

REMOTE CONTROL
Along with standard functions, the remote control has a quick start-up function. This is very convenient when constant observation is not conducted in order to find the appropriate position, take aim and shoot.

INTERNAL FOCUSING OF THE OBJECTIVE
The image focusing mechanism (from 5 m. up to infinity) provides clear image at any distances (including short) within the riflescope's working range.

POWER SUPPLY
A stabilized power supply ensures up to 70 hours of full operation. This prevents reticle shift, change of its brightness even when the battery is nearly empty.

OBJECTIVE LENS CAP
The cap is fastened on a rigid plastic ring dipped into the groove in the objective of the covering. This secures the cap from being lost. There is no need to remove the cap when viewing or shooting - you can simply slide it back and fix anywhere on the objective housing.

WEAVER 7/8” RAIL
The riflescope has an extra 7/8” Weaver rail placed on the left side of the body and is designed for mounting accessories (IR illuminator, directional microphone and laser pointer).

BUILT-IN IR ILLUMINATOR
The built-in IR illuminator makes it possible to use the riflescope in utter darkness. The IR has the function of focusing the light flux, ranging from narrow directed to dispersed.

MOUNT
The Sentinel G2+ 4x60 has a wide range of mounts for weapon, including Weaver 7/8” (3 modifications), AK Side Mount, «Los» Mount, and Prism 14/200 Mount.